Image is for illustration only and should not be relied upon Danfoss Randall RA/VL 2950 Sensor
Danfoss Randall RA/VL 2950 Sensor

Danfoss Randall RA/VL 2950 Sensor

0 reviews
£31.19
Ex VAT: £25.99
Brand:
HCO Code: 02D02
Availability:  In Stock

As part of the commitment to service Danfoss Randall produce a range of Built-In and Remote Sensors that fit directly to older RAVL valve bodies.

Replacement sensors incorporate RA 2000 sensor technology and design and provide a simple and straight forward way to upgrade older radiator thermostats without the need to drain down the system.

Part no. 013G295000 (013G2950)
Previous Part No. 013G221000 (013G2210)

For valves with 26mm valve neck.

Please see our Danfoss Replacement TRV Sensor guide

Related products:
Replacement gland for Danfoss RAVL TRVs

 

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • Unfortunately I have no trace of that number.  Please send a photo to sales@heatingcontrolsonline.co.uk
  • As long as the valve has a 26mm brass neck, then it will be suitable.

  • Hi. Only Danfoss ones with a 26mm neck.
  • I'm afraid bs6284 is not the model number. Please email us a photo to sales@heatingcontrolsonline.co.uk
  • Please email us a photo of them to sales@heatingcontrolsonline.co.uk
  • As long as it has the 26mm neck in the replacement guide link. I'm afraid I don't have any other photos.
  • As the temperature in the room changes, the sensor expands or contracts to press or release a pin in the valve body. This controls the flow of hot water into the radiator.
  • Yes it is.
Showing 1 to 8 of 8 (1 pages)
Expand All
  • Unfortunately I have no trace of that number.  Please send a photo to sales@heatingcontrolsonline.co.uk
  • As long as the valve has a 26mm brass neck, then it will be suitable.

  • Hi. Only Danfoss ones with a 26mm neck.
  • I'm afraid bs6284 is not the model number. Please email us a photo to sales@heatingcontrolsonline.co.uk
  • Please email us a photo of them to sales@heatingcontrolsonline.co.uk
  • As long as it has the 26mm neck in the replacement guide link. I'm afraid I don't have any other photos.
  • As the temperature in the room changes, the sensor expands or contracts to press or release a pin in the valve body. This controls the flow of hot water into the radiator.
  • Yes it is.
Showing 1 to 8 of 8 (1 pages)