Image is for illustration only and should not be relied upon Secure (Horstmann) H27 XL Series 2 Channel.Plus

Secure (Horstmann) H27 XL Series 2 Channel.Plus



£155.99
Ex VAT: £129.99
HCO Code: 01D02
Availability:  Obsolete

Directly replaces earlier H21 / H21XL / H27 / H27XL

* Complete with new backplate
* Channel names can bet set to Heating/HW or Zone1/Zone2
* 2 Channel 7 Day Programmer
* 5 Year manufacturers warranty
* Large easy to follow LCD display
* Backlit display (on button press)
* Pre-Set clock
* Automatic Winter/Summer time changes
* Gravity or Fully Pumped system setting
* Up to 3 on/offs per channel in each 24-hour operation
* One touch programme copying from day to day
* Programmable Holiday setting can be set in advance of departure for any period of time.
* 1 or 2 hour boost and advance on each channel
* Mains powered with battery backup
* Voltage free
* Dimensions: 101x163x33mm HxWxD
* Same backplate as Horstmann 425 and 5 series programmers

 

Replaces (same backplate and wiring for easy changeover):
Honeywell ST1501 ST1507 ST1000
Horstmann H21 H21XL H27Z H525 H527 H425 Tiara Diadem.
Newlec NL425T NLH21 NLH27 NLE527
Danfoss Randall SET 2, SET2E, SET 3, SET3M, SET 5
Sangamo SET2
 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • There is nothing else that will go onto the existing backplate.

    The HCO Code BU098 would be suitable if you can change the backplate.

  • Press the green ‘SET’ button
    Use the ‘+’ and ‘-’ buttons to select ‘SET DEFAULTS’ and press enter
    Use the ‘+’ and ‘-’ buttons to adjust ‘TIME AND DATE’ and press enter
    Use the ‘+’ and ‘-’ buttons to adjust THE CURRENT TIME and press enter
    Use the ‘+’ and ‘-’ buttons to adjust THE DAY and press enter
    Use the ‘+’ and ‘-’ buttons to adjust THE MONTH and press enter
    Use the ‘+’ and ‘-’ buttons to adjust THE YEAR and press enter
    Press the green ‘SET’ button twice
  • Hi.  This is a dual channel programmer, so is not suitable to replace the Sunvic 107XLS.

  • It will plug on, but the backplate is in a different place, so you will either need some clearance to the left of the existing H525 to to move the backplate across.
Showing 1 to 15 of 56 (4 pages)