Image is for illustration only and should not be relied upon Drayton ZA5 Actuator

Drayton ZA5 Actuator



£49.91
Ex VAT: £41.59
HCO Code: 15B57P
Availability:  In Stock

Replacement Actuator for:

Drayton ZA5/679-2 Zone Valve.
Drayton ZA5/679-3 Diverter Valve.
British Gas BGMVSP-2 Zone Valve.

Drayton part number 27650

Can be used to replace 8-716-108-723 (87161087230) or 8-718-684-238 (87186842380) when used with Regin Plug socket (see related products)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • If you can remove the actuator and control the flow by manually rotating the shaft, then it will be the actuator only. If rotating the shaft doesn't effect flow (or if the shaft is stuck) then a whole valve will be needed.
  • Yes, but this doesn't have the plug on the end of the cable. So you will need to use the Regin Plug/socket (In "Related Items") to connect the old plug to the new actuator.
  • The ZA5 would be suitable. You would also need the regin 5-way to fit the old plug to the new head. See the related tab.
  • Yes, the wiring is the same. This one comes with bare ends, so you need to fit the old plug to the new actuator. This is easier using the Regin 5-way Plug/Socket under the related tab.
Showing 1 to 13 of 13 (1 pages)
  • If you can remove the actuator and control the flow by manually rotating the shaft, then it will be the actuator only. If rotating the shaft doesn't effect flow (or if the shaft is stuck) then a whole valve will be needed.
  • Yes, but this doesn't have the plug on the end of the cable. So you will need to use the Regin Plug/socket (In "Related Items") to connect the old plug to the new actuator.
  • The ZA5 would be suitable. You would also need the regin 5-way to fit the old plug to the new head. See the related tab.
  • Yes, the wiring is the same. This one comes with bare ends, so you need to fit the old plug to the new actuator. This is easier using the Regin 5-way Plug/Socket under the related tab.
Showing 1 to 13 of 13 (1 pages)