Image is for illustration only and should not be relied upon Danfoss Randall HPA2 Actuator
Danfoss Randall HPA2 Actuator

Danfoss Randall HPA2 Actuator

0 reviews
£34.67
Ex VAT: £28.89
Brand:
HCO Code: 07E02
Availability:  Out Of Stock

HPA2:
2 Port valve actuator.

Interchangeable with:
Landis & Gyr SK2
Sunvic (Satchwell) SZ1301, SZ2301, SZ2401
Potterton PMV2 Actuator
Part No. 087N657900

Note when replacing Sunvic/Range SZM1801, SZM1802, SZM1803, SZM1808 or SZM1809:  This actuator is only suitable when the existing actuator is fixed to the valve by two screws.  It will not fit valves where the actuator pushes onto the valve.

Note when replacing Sunvic SM5203, SM4203 or SM3203:  Minor wiring changes is needed including a permanent live.  See downloads for more details.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • Yes, just make the two extra wires safe.

  • Hi.  It will fit to the existing valve so is a dry job.

  • Yes it will.  Depending on the age of the valve, you may need to use cable ties through the screw holes fix it in place.

  • Yes it will.  Wiring changes details are under the downloads tab.
  • That is not the part number.  Please email us a photo to sales@heatingcontrolsonline.co.uk.

  • Hi.  Yes it will.  You will need to isolate the two extra wires.

  • Yes, you can order for delivery to Cyprus.

  • Yes it will.
  • Yes that's correct. It is new.
  • It depends what device you are looking to plug it into. You can usually connect the plug from your old actuator to the new one by cutting it off at the wire and connecting the wires together.
  • They are bare wires
  • Yes it will.
  • It depends on what valve body you have. It is the EML3454, the HPA2 will fit.
  • They are compatible. Both units are 90 degrees rotation between open and close.
  • It is 2 years from date of manufacture. The Warranty expiry date is printed on the underneath of the actuator.
Showing 1 to 15 of 17 (2 pages)
Expand All
  • Yes, just make the two extra wires safe.

  • Hi.  It will fit to the existing valve so is a dry job.

  • Yes it will.  Depending on the age of the valve, you may need to use cable ties through the screw holes fix it in place.

  • Yes it will.  Wiring changes details are under the downloads tab.
  • That is not the part number.  Please email us a photo to sales@heatingcontrolsonline.co.uk.

  • Hi.  Yes it will.  You will need to isolate the two extra wires.

  • Yes, you can order for delivery to Cyprus.

  • Yes it will.
  • Yes that's correct. It is new.
  • It depends what device you are looking to plug it into. You can usually connect the plug from your old actuator to the new one by cutting it off at the wire and connecting the wires together.
  • They are bare wires
  • Yes it will.
  • It depends on what valve body you have. It is the EML3454, the HPA2 will fit.
  • They are compatible. Both units are 90 degrees rotation between open and close.
  • It is 2 years from date of manufacture. The Warranty expiry date is printed on the underneath of the actuator.
Showing 1 to 15 of 17 (2 pages)