Image is for illustration only and should not be relied upon Orkli TRV Adaptor

Orkli TRV Adaptor

1 reviews

£15.59

Ex VAT: £12.99

Manufacturer Other

HCO Code: 15A85

Stock In Stock

Adaptor for fitting a head with a M30x1.5mm thread to a Orkli, Concerto or Wessex (M28x1.0) TRV body.

Suitable for (see related items):
Multi-Fit TRV Head
Honeywell HR80/HR80UK
Honeywell Evohome HR92/HR92UK
Hive
Drayton Wiser
Netamo
Lightwave
Tado
Multi-Fit Thermal Actuator

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Expand All

Will this convert Wessex M28 TRV to fit a Hive smart TRV? Answers1

Yes it will.

Hi, is there a replacement for this? I have a house full of Wessex trvs which seem to be 28x1.0 and want to fit Bosch smart trvs to the radiators Answers1

Hi. We hope to have some in around a week.

I have Temtrol TRVs with 28mm body thread circa 1988. Will this adaptor fit and what manufacturers TRV head will I be able to fit please. Answers1

No. You need HCO code 15A87.

Will this work with a Drayton TRV3 for Hive thermostat? Thanks Answers1

I'm afraid not.

Hi I have an HIVE radiator valve and none of the adaptors supplied fit. I have been advised that I need an M28x1.0” adaptor. Is the is the right item I need to purchase as I do not know the make of the valves that are existing. Answers1

Hi. It sounds like this is the correct one. If you email us photos of your existing valves we can confirm.

Hi. I have Concerto TRVs which have a 28mm 1.0mm pitch thread onto the valve. Will this adaptor work to get to a Hive head? Cheers, Answers1

Hi Yes it will.

Hello, I am full of ORKLI radiators and would like use intelligent TADO heads Is it the right product that will permit to use the TADO heads ? Best regards Yves Answers1

Hi Yes it is.

Hi there, I have "Viking by Orkli 5" TRVs and want to fit eqiva bluetooth thermostats. So, I need M28 to M30 adapters... but... I've already added the controls to some Westherm valves using adapters which look like the adapters in your pic - these didn't fit the Orkli TRVs because of the pin length. The Orkli pin is 10.5mm long (I have a photo if that would help). Are these adapters the correct ones or is there another specific adapter for the Orkli TRVs? Look forward to hearing from you. best regards Answers1

Hi These are the correct ones you need.

Hi, I have an old Drayton TRV and need to fit a Tado remote thermostat. None of the Tado adaptors fit, will this enable me to fit the Tado to the valve body? Thanks, Russ Answers1

Hi. It depends on the model. Please email us a photo of it.

I have bought 10 Hive TRV's, only 1 does not function correctly as the pin in the existing valve is too short. Will this fix the issue do you think? Answers1

Please email us a photo of the head that was previously fitted to the valve to sales@heatingcontrolsonline.co.uk

Hello. I have a house FULL of Orkli radiator valves, in place of which I want to connect the HIVE smart TRVs. However, the Hive will not connect directly to the Orkli threads. As the Hive comes with an M30 adaptor, if I install your adaptor, would that allow me to connect the HIVE TRV's? Answers1

Yes that's correct.

Can this adapter be used to convert a Wessex body M30x1.0mm to fit a Hive TRV which comes supplied with an adaptor to fit an M30x1.5mm? Thanks for your attention. Answers1

Please email us a photo of the Wessex TRV to sales@heatingcontrolsonline.co.uk

Hi - I have some HR92 and need to fit a Salus body ideally to save me replacing things - they are listed elsewhere as fitting direct - but do not - and look similar to the ACH28 but with finer thread - so one might guess @ 1mm pitch - do you know if this fits? (also an old Wickes TRV has a similar looking thread?) Thanks Answers1

Hi. Salus and Wickes have done Orkli TRVs in the past. Please email us a photo to sales@heatingcontrolsonline.co.uk and we will confirm.

Hi. Will this adaptor allow us to fit Drayton Wiser TRV heads on Orkli Suretherm bodies? Answers1

Hi. Yes they will.

I have an Orkli TRV which has the figure 29 on it. This appears to be the width of the fitting. Will your Orkli TRV adaptor convert this to accept a Genius head? The body is too big to accept a 28mm adaptor and too small to accept a 30mm head Answers1

Yes it will.

Showing 1 to 15 of 27 (2 pages)

Expand All

Will this convert Wessex M28 TRV to fit a Hive smart TRV? Answers1

Yes it will.

Hi, is there a replacement for this? I have a house full of Wessex trvs which seem to be 28x1.0 and want to fit Bosch smart trvs to the radiators Answers1

Hi. We hope to have some in around a week.

I have Temtrol TRVs with 28mm body thread circa 1988. Will this adaptor fit and what manufacturers TRV head will I be able to fit please. Answers1

No. You need HCO code 15A87.

Will this work with a Drayton TRV3 for Hive thermostat? Thanks Answers1

I'm afraid not.

Hi. It sounds like this is the correct one. If you email us photos of your existing valves we can confirm.

Hi. I have Concerto TRVs which have a 28mm 1.0mm pitch thread onto the valve. Will this adaptor work to get to a Hive head? Cheers, Answers1

Hi Yes it will.

Hello, I am full of ORKLI radiators and would like use intelligent TADO heads Is it the right product that will permit to use the TADO heads ? Best regards Yves Answers1

Hi Yes it is.

Hi These are the correct ones you need.

Hi, I have an old Drayton TRV and need to fit a Tado remote thermostat. None of the Tado adaptors fit, will this enable me to fit the Tado to the valve body? Thanks, Russ Answers1

Hi. It depends on the model. Please email us a photo of it.

I have bought 10 Hive TRV's, only 1 does not function correctly as the pin in the existing valve is too short. Will this fix the issue do you think? Answers1

Please email us a photo of the head that was previously fitted to the valve to sales@heatingcontrolsonline.co.uk

Yes that's correct.

Can this adapter be used to convert a Wessex body M30x1.0mm to fit a Hive TRV which comes supplied with an adaptor to fit an M30x1.5mm? Thanks for your attention. Answers1

Please email us a photo of the Wessex TRV to sales@heatingcontrolsonline.co.uk

Hi. Salus and Wickes have done Orkli TRVs in the past. Please email us a photo to sales@heatingcontrolsonline.co.uk and we will confirm.

Hi. Will this adaptor allow us to fit Drayton Wiser TRV heads on Orkli Suretherm bodies? Answers1

Hi. Yes they will.

Yes it will.

Showing 1 to 15 of 27 (2 pages)

More

Orkli TRV Adaptor

Write a review

Multi-Fit TRV Head

Netatmo Pro Smart Radiator Head

Legal

My Account

Information

Extras

Contact Us

High Quality

Awesome Support

Really Fast Deliveries

14-Day Returns

Secure Checkout

Orkli TRV Adaptor

Write a review

Related Products

Multi-Fit TRV Head

Netatmo Pro Smart Radiator Head

My Account

Information

High Quality

Awesome Support

Really Fast Deliveries

14-Day Returns

Secure Checkout