Image is for illustration only and should not be relied upon Multi-Fit Thermal Actuator 24v (Low Voltage)

Multi-Fit Thermal Actuator 24v (Low Voltage)

Manufacturer Other

Express delivery Available Until 4pm
UK Mainland Only,
3pm cut-off for Highlands and Islands
1pm for Europe

Image Product Stock Price Add to Cart
 2-Wire
2-Wire
HCO Code: 02C06
 In Stock £14.40 Ex VAT: £12.00
 
 4-Wire
4-Wire
HCO Code: 11A11
 In Stock £32.41 Ex VAT: £27.01
 

Normally Closed manifold thermoelectric actuator.

Suitable for a large range of underfloor heating manifolds including:
John Guest Speedfit
Polyplumb
Emmeti Topway
Nu-Heat
Uponor TM, FM, FR, MF & RA 

Can also be used on many TRV bodies, for example Honeywell

Replaces many existing actuators, including:
Uponor 1002053 (2-Wire) 
Watts Telestat 10C:
    10C24NC2 (2-Wire)
    10C24NC4 (4-Wire)
Watts Telestat 20C:
    20C24V (2-Wire)
Watts Telestat 20CI:
    20CI-24V (2-Wire)
Watts 22C
    22C24NC2 (2-Wire)
    22C24NC2-5 (2-Wire)
    22C24NC4 (4-Wire)
Honeywell
    M100-AG (2-Wire)
    M100-AGE (4-Wire)
    Z100-AG (2-Wire)
    Z100-AGE (4-Wire)
    H200-AG (2-Wire)
    M8001V24 (2-Wire)
Caleffi
    656104 (2-Wire)
    656114 (4-Wire)
Taconova
    Novadrive 257.1855.000 (2-Wire)
    Novadrive 257.1862.000 (2-Wire)
    Novadrive 257.1255.500 (4-Wire)
Danfoss
    TWA-K 088H3140 (2-Wire)
Heimeier
    1827-00.500 (2-Wire)
ICMA
    82980NC54 (2-Wire)
    82979NC54 (4-Wire)
BEHR Thermaqua
    X7.590 02 024 10
    X7.590 47 024 10
    X7 565 02 024 1A (2-wire)
    X7 590 10 024 10 (2-wire)
Aqualec
    SA92
Warmafloor
    CAH02401 (2-Wire)



And many more. Please e-mail us if your model isnt listed.



Technical Detail:
Input Voltage: 24v 50/60Hz
Throw: 3.6mm
Breakaway Current: <0.35A
Input: <0.125 (3VA)
Auxillary Switch (4-wire version only): 5A
Max air temperature: 60C
Protection (side or upside down mounted): IP40
Protection (upwards mounted): IP44
Opening Time: 5-6 Minutes
Thread M30x1.5

These are high quality electrothermic actuators. Beware of cheap, unreliable, brands being offered elsewhere.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • Several versions were available. Pease email us a photo.
  • I'm afraid we don't have any 12v ones.
  • They are closed without power. No, they are designed to be either open or closed. They can be partially opened by pulsing the voltage (e.g. one minute on - one minute off) but it is not an exact science and will vary from valve to valve.
  • Behr numbers are usually 4 sets of numbers. Please check it and confirm.
  • Hi. Yes you can. You will need a 24v supply as well as 230v for the receiver.
  • The 2-wire version can be used in Zone 2 (or outside of the zones) of a bathroom. The 4-wire is not suitable for use in a bathroom.
  • No you need to remove the base of the Taconova actuator as well. This will then screw on to the threaded connection.
Showing 1 to 15 of 23 (2 pages)