Image is for illustration only and should not be relied upon Drayton TRV4 Replacement Head

Drayton TRV4 Replacement Head

Drayton TRV4 Replacement Head

0 reviews

£20.27

Ex VAT: £16.89

Brand: Drayton (ACL)

HCO Code: 13C12

Availability: In Stock

Replacement TRV4 head.

Drayton model number: 07 25 006

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Can theses be used to replace the actuator heads of danios RAS C2? Is there and adaptor needed? Answers1

You need RA adaptor 15A99.

I have a Drayton TRV 4 radiator valve that has broken off. Is it easy to fit? Answers1

Yes, it is a very easy fit.

Hi, Will this fit a Westherm body with 28mm thread, if not is there an adapter that would be suitable ? Answers1

You will need Westherm adaptor PK21.

The house we bought has Giacomini valves which are breaking. What other makes (e.g. Drayton) could I replace the heads with? Answers1

To fit any other make you will need adaptor 15A70.

Can you supply TRV heads only which are the older 28mm thread fitting. If so please give price. Thanks, Keith Nicholson. Answers1

We can supply heads to replace most TRVs. Please email us a photo of the head you are looking to replace to sales@heatingcontrolsonline.co.uk

Can I replace Bulldog Gen2 TVR heads with these TRV4 heads? Answers1

I would not recommend it as the hex nut size is different so the whole head will rotate when you try to adjust it. I would recommend the Terrier III head. HCO code BU215.

Hi,Will a TRV4 replacement head fit a TRV3 body ? Answers1

I'm afraid not.

One of my Drayton TRV2 radiator valves has failed, will a TRV4 head be a direct replacement. Answers1

I'm afraid not. You will need to replace the whole valve.

Hi, Can you advise if all the threads on Drayton valves the same? I have a very old Drayton valve that has stopped working, it does not cut out when the room is at temp and I would like to replace just the head not the whole value. Many thanks. Answers1

I'm afraid not. If you email a photo of it to sales@heatingcontrolsonline.com we will advise if a replacement is available.

Hi, I'm looking to replace my "Myson TRV 2 Ways" with these, I would like to avoid draining down and replacing the whole valve if I can. Will these for as a stright swap and if not is there an adapter that can make it possible? Thanks in advance Answers1

The throw is different so they will not work as well as if fitted to Drayton bodies.

Hello. The Drayton TRV on my radiator has snapped off at the metal cuff (I believe the plastic has perished). It has left me with the cuff (which can be screwed off) and the pin protruding. Can I buy a replacement head and carry out the replacement without draining down the system? Regards. Matt. Answers1

Yes, provided your old one is also TRV4.

Can I replace my RT212 heads with TRV4 heads with no problem. Answers1

Yes you can.

Will this head fit the old style TRV4 valves which have a small pin (rather than the current valves which have a more substantial pin) and came with black (rather than the current blue) screw on caps? I think I bought a replacement head a number of years ago and it came with a converter ring but I may be confusing this with something else. Answers1

If you email us a photo of your existing head to sales@heatingcontrolsonline.com will can advise on a suitable replacement.

Hi, the head on my TRV4 rusted and fell off. Do I just need this? 15mm? Answers1

Yes, if the body is OK then this would be the bit you need.

Showing 1 to 14 of 14 (1 pages)