Q: Hi will this replace the Danfoss ITC 099-1058
previous email wrong , sorry
A: Hi. Yes it will
Q: I currently have the tamperproof version of this fitted and it could need replacing. Is there any difference with this one other than the cover and exposed dial?
A: No there isn't any difference.
Q: Will this model replace the ITC-100 (0-90C) 099-1057. The pocket is already in the cylinder so I only need to replace the unit as the probe has broken.
A: Yes it will.
Q: Do you stock the tamper proof version?
A: We don't stock it, but can order it in for you. Please email firstname.lastname@example.org for a price.
Q: Hi, I'm unfamiliar with this type of cylinder stat. Would this be appropriate for fitting to a 1/2 BSP tapping that puts the probe in direct contact with the DHW? and therefore needs to seal the outlet as well as read the temperature. Thank you.
A: The pocket that comes with the thermostat screws into the 1/2" tapping. The thermostat probe then inserts into the pocket keeping the probe dry.
Q: Can you confirm whether the 1/2'' BSP/100mm pocket as parallel thread?
A: Yes it is.
Q: I need to replace two IMIT TC2 1750 Thermostat Cod 542469. Can this replace them?
A: Yes it can.
Q: What is diameter of probe
A: It is 6.5mm
Q: Hi,I'm looking for a replacement Thermostat for a IMIT Type TC2 1750 542470, Which is defective.
A: This will replace that one directly.
Showing 1 to 9 of 9 (1 Pages)
Ask a question about Danfoss Randall ITC Cylinder Thermostat
- Used to control water temperature in the hot water cylinder
- Secure immersion sensing
The ITC 100 is an immersion thermostat which has a 100mm insertion length. The thermostat which is supplied with a ½"BSP/100mm pocket is suitable for the control of applications which require accurate immersion sensing e.g. unvented hot water systems.
The thermostat which has an adjustment range of 0-90°C has SPDT contacts making it suitable for the control of all types of motorised valves.