Image is for illustration only and should not be relied upon Lockable Thermostat Guard

Lockable Thermostat Guard



£16.79
Ex VAT: £13.99
Brand:
HCO Code: 12A02
Availability:  In Stock

* Complete with key for tamperproofing.
* Holes in frame allow air to circulate freely.
* Easy to install - flush mounted.
* Max. Size of thermostat 156x91x65mm HxWxD.
* Outer dimensions of guard: 190x120x75mm HxWxD

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • With a 42mm surface pattress it would be too deep.  With a 25mm pattress it would be OK.

  • This will fit over a Honeywell CM927 or a Y87RF2024. The Berrcom is a handheld infrared thermometer. It is not suitable for this.
  • No. I would recommend HCO code 25A14 instead.
  • Can you please let us know the model number or a photo of it. We will then check it for you.
  • Assuming it is the current model, no. I would recommend the larger guard 25A14.
  • No. You will need HCO code 25A14
Showing 1 to 15 of 25 (2 pages)
  • With a 42mm surface pattress it would be too deep.  With a 25mm pattress it would be OK.

  • This will fit over a Honeywell CM927 or a Y87RF2024. The Berrcom is a handheld infrared thermometer. It is not suitable for this.
  • No. I would recommend HCO code 25A14 instead.
  • Can you please let us know the model number or a photo of it. We will then check it for you.
  • Assuming it is the current model, no. I would recommend the larger guard 25A14.
  • No. You will need HCO code 25A14
Showing 1 to 15 of 25 (2 pages)