Image is for illustration only and should not be relied upon Watts Milux Programmable Thermostat

Watts Milux Programmable Thermostat



£61.50
Ex VAT: £51.25
HCO Code: 22A05
Availability:  In Stock

Programmable Thermostat with digital display.
Simple programming function by bargraph (1 hour steps).
Several working modes: Auto, Comfort, Reduction, Anti-Freeze, Holiday and OFF.

Operating voltage: 3 x AA LR6 1,5 V
Output: Relay 230 VAC / 5A (Free Contact)
Connection: screw connector 3 points. (Common, NO, NC)
Setting temperature : 5C° - 35C°
Differential at 20C°: 0.5C°
Protection class: IP30

Replaces:
Watts P-1814, P-2384
Polypipe PB PZP, Polyplumb PBPRP and Speedfit JGUFHPRS
 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • If a remote sensor is connect to the top pins, then you will need  the BT-DP instead.  HCO code 11B22.

  • I'm afraid not.  I would recommend the Danfoss TPOne-B instead.  HCO Code 21A19.
  • Hi. It will be suitable as long as there is not a cable connected to the top NTC terminals. You will need to change the back box as it has had a slight design change.
  • Yes, as long as the top two terminals (remote sensor) are not currently being used.
Showing 1 to 15 of 38 (3 pages)
  • If a remote sensor is connect to the top pins, then you will need  the BT-DP instead.  HCO code 11B22.

  • I'm afraid not.  I would recommend the Danfoss TPOne-B instead.  HCO Code 21A19.
  • Hi. It will be suitable as long as there is not a cable connected to the top NTC terminals. You will need to change the back box as it has had a slight design change.
  • Yes, as long as the top two terminals (remote sensor) are not currently being used.
Showing 1 to 15 of 38 (3 pages)