Image is for illustration only and should not be relied upon Siemens DVA3 (CMV322 CMV328) Replacement Actuator

Siemens DVA3 (CMV322 CMV328) Replacement Actuator

Siemens DVA3 (CMV322 CMV328) Replacement Actuator

0 reviews

£107.93

Ex VAT: £89.94

Brand: Siemens (Landis & Staefa/Gyr)

HCO Code: 22C05

Availability: In Stock

Replacement Actuator for Siemens CMV322 or CMV328 motorised valves.

Also suitable for replacement of Orkli models 70551600, 70451600, 70851600, 70951600 or 50051600

Boss Therm BMPV222

Not suitable for motorised valves with other model numbers.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Hi
I have ordered a new actuator from you. You answered my question by saying - "After switching off the power, hook the lever into the manual position and just pull the actuator up." I have ordered a new actuator because the lever is floppy and cannot be used as you describe. Will this affect my getting the actuator off ? Answers1

Hi. No it shouldn't.

IHow do you get the old actuator off? Answers1

After switching off the power, hook the lever into the manual position and just pull the actuator up.

Hi
Looking for a replacement actuator for a Landis and gyr part no Mav - 322 will is this a direct replacement to fit the existing valve body
Thanks Answers1

Hi
No, yours is too old. You will need to replace the complete valve including body.

Hi I am looking for a replacement Demountable Actuator DVA3 it is a BossTherm BMPV222 with a slot drive will this unit be a direct replacement Answers1

Hi
Yes it will.

Hi, I have a conventional central heating and water system which has a 3 way motorised valve. On the valve description is Siemens DVA3 demountable actuator,230 volts,50HZ,3 amps, mid position CMV322. The water has stopped heating and I have looked inside the actuator and I have noticed that the half moon has got some of the teeth worn away. Is this item I am looking at the replacement I need. Thank you. Answers1

Hi. Yes it is.

I need a Siemens actuator for my 3 way 28mm valve, is the DVA3 suitable for both the 22 & 28 mm? Answers1

Yes it will fit either.

My cmv322 when switching between hot water and heating, mechanically it works but when a switch to heating, it doesn't tell the pump or the boiler to work. Is this a common fault or is the divertor broke. Answers1

It sounds like the microswitch in the actuator has failed. So a new actuator would be needed.

Can you confirm that this will fit the Boss Therm BMPV222 valve with the Demountable spring clips. Thanks Answers1

Yes it will.

I have siemens DVA3 Mid position CMV322, it no longer heats the hot water, can i just replace the actuator? thanks Answers1

Yes you can.

Will this replace all 3 port Siemens actuators only need the acuator not the 3 way valve Answers1

No, this is only suitable for the model numbers listed.

Hi, I have a three port, mid position, Boss Therm actuator BMPV282. Can I just replace the actuator and if so what would you recommend or do I need to replace the whole unit? Thanks, Tony Answers1

Hi. Yes this actuator will be suitable.

I have a Siemens Part RMH actuator Head that needs replacing. Is there a direct replacement as this part is now obsolete? If not what part do I need to use for the valve and actuator assembly? Thanks Answers1

I'm afraid not. A complete valve change is needed. Please let us know if it is 2-port or 3-port and the pipe size. We will recommend a replacement.

I have a Landis and Staefa MAV-322. Is this a replacement for the actuator on that valve? Answers1

No. The complete valve will need to be changed.

Hi can you please let me know if this can replace a siemens ZA-V222C? If not which one on your website could? thanks Sophie Answers1

I'm afraid you can no longer get replacement actuators for the ZA-V222C. A complete valve change is needed. I would recommend the Drayton ZA5/679-2 to replace it.

Will this head fit the Thermo Boss BPZ:BMPV222 3 way valve? The current actuator includes the designation BPZ:DVA3. Answers1

Yes it will.

Showing 1 to 15 of 22 (2 pages)

1
2
>
>|

Hi
I have ordered a new actuator from you. You answered my question by saying - "After switching off the power, hook the lever into the manual position and just pull the actuator up." I have ordered a new actuator because the lever is floppy and cannot be used as you describe. Will this affect my getting the actuator off ? Answers1

Hi. No it shouldn't.

IHow do you get the old actuator off? Answers1

After switching off the power, hook the lever into the manual position and just pull the actuator up.

Hi
Looking for a replacement actuator for a Landis and gyr part no Mav - 322 will is this a direct replacement to fit the existing valve body
Thanks Answers1

Hi
No, yours is too old. You will need to replace the complete valve including body.

Hi I am looking for a replacement Demountable Actuator DVA3 it is a BossTherm BMPV222 with a slot drive will this unit be a direct replacement Answers1

Hi
Yes it will.

Hi, I have a conventional central heating and water system which has a 3 way motorised valve. On the valve description is Siemens DVA3 demountable actuator,230 volts,50HZ,3 amps, mid position CMV322. The water has stopped heating and I have looked inside the actuator and I have noticed that the half moon has got some of the teeth worn away. Is this item I am looking at the replacement I need. Thank you. Answers1

Hi. Yes it is.

I need a Siemens actuator for my 3 way 28mm valve, is the DVA3 suitable for both the 22 & 28 mm? Answers1

Yes it will fit either.

My cmv322 when switching between hot water and heating, mechanically it works but when a switch to heating, it doesn't tell the pump or the boiler to work. Is this a common fault or is the divertor broke. Answers1

It sounds like the microswitch in the actuator has failed. So a new actuator would be needed.

Can you confirm that this will fit the Boss Therm BMPV222 valve with the Demountable spring clips. Thanks Answers1

Yes it will.

I have siemens DVA3 Mid position CMV322, it no longer heats the hot water, can i just replace the actuator? thanks Answers1

Yes you can.

Will this replace all 3 port Siemens actuators only need the acuator not the 3 way valve Answers1

No, this is only suitable for the model numbers listed.

Hi, I have a three port, mid position, Boss Therm actuator BMPV282. Can I just replace the actuator and if so what would you recommend or do I need to replace the whole unit? Thanks, Tony Answers1

Hi. Yes this actuator will be suitable.

I have a Siemens Part RMH actuator Head that needs replacing. Is there a direct replacement as this part is now obsolete? If not what part do I need to use for the valve and actuator assembly? Thanks Answers1

I'm afraid not. A complete valve change is needed. Please let us know if it is 2-port or 3-port and the pipe size. We will recommend a replacement.

I have a Landis and Staefa MAV-322. Is this a replacement for the actuator on that valve? Answers1

No. The complete valve will need to be changed.

Hi can you please let me know if this can replace a siemens ZA-V222C? If not which one on your website could? thanks Sophie Answers1

I'm afraid you can no longer get replacement actuators for the ZA-V222C. A complete valve change is needed. I would recommend the Drayton ZA5/679-2 to replace it.

Will this head fit the Thermo Boss BPZ:BMPV222 3 way valve? The current actuator includes the designation BPZ:DVA3. Answers1

Yes it will.

Showing 1 to 15 of 22 (2 pages)

1
2
>
>|