Image is for illustration only and should not be relied upon Siemens RAM-TR.2000M Pipe Stat
Siemens RAM-TR.2000M Pipe Stat

Siemens RAM-TR.2000M Pipe Stat

0 reviews
£17.53
Ex VAT: £14.61
Brand:
HCO Code: 04C02
Availability:  In Stock

* Bi-Metallic
* 20C-90C
* 16A Contacts
* Ideal pipe thermostat up to 40mm
* SPDT contacts
* 24V-250V
* Dimensions 105x38x42mm HxWxD


 

 

 

 

 

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • You will need to pull off the dial.  This will expose a screw that will need to be removed before the cover comes off.

  • Hi. Yes it will.
  • It is 8±3K
  • Yes, it will connect to the same wires.
  • It needs to be strapped on. So if the coil is tight up against the flue, you wont be able to get the strap around it.
  • It is a control thermostat rather than a limit thermostat, so the pump would switch off again when it drops below 85C.
  • It can be either 2-wire or 3-wire.
  • Yes, that's correct. Unfortunately, they have not given a reason for this requirement.
  • It is a bimetallic switch type. It needs a minium current of 200mA to function correctly.
  • You just strap it on. You can use a cable tie or similar to hold it.
  • Yes, it should be between 55 and 60.
  • Assuming the model number is RAM1 as well, then yes.
Showing 1 to 12 of 12 (1 pages)