Image is for illustration only and should not be relied upon Sunvic (Satchwell) DM5601 Actuator

Sunvic (Satchwell) DM5601 Actuator



£114.96
Ex VAT: £95.80
HCO Code: 03B03
Availability:  In Stock
Sunvic (previously Satchwell) DM5601 3 Port Actuator Mid-Position
For use with valve body type MK
Motor Open - Motor Close type
Replaces: DM4601 DM3601.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Does the motor turn valve 360 degrees or does it reverse when it reaches microswitch
It turns the valve 360 degrees.
I HAVE A SUNVIV DM5601 ACTUATOR, BUT NEED A NEW 22MM VALVE BODY TO MATCH?
Unfortunately the valve body is obsolete. You will need to change to the newer SDV2212. Some rewiring of the junction box will be needed.
Can I use the DM5601 as a direct replacement for a DM4601?
Yes you can.
What is the difference between the Sunvic DM5601 and the DM 5651. I need to replace my Sunvic actuator but can't tell which one it is. The valve body is a Sunvic MK1543
The DM5651 has a plug preinstalled on the end. The DM5601 is bare wires.
Is this actuator a direct replacement for a DM5601 Sunvic duoval actuator.? the wiring colours are the same. Is there an MK 3 port 28mm compatible with this actuator available? Regards Garth Collins
Yes, this can replace the DM5601. Unfortunately Sunvic no longer make a suitable 28mm valve body.
What colour are the wires and how many.
There are 5 wires: Orange Blue Yellow White Green/Yellow

Ask a question

Note: HTML is not translated!
Captcha