Dual Thermostat for unvented cylinders.
Suitable for applications where direct fitting is required by means of a pocket. Internal device: Capillary thermoregulator and limiter thermostat.
..
Ideal for use on hot water cylinders
Can be used for Underfloor Heating - switching off the secondary circulating pump when the flow rail goes over the set temperature (e.g. when the mixing valve f..
The ATC is an electro-mechanical surface mounted cylinder thermostat which is clamped to the cylinder by means of a spring clamping band.
* 6(2.5)A SPDT contacts
* Dimensions 120x40x58mm HxWxD
..
- Used to control water temperature in the hot water cylinder
- Secure immersion sensing
The ITC 100 is an immersion thermostat which has a 100mm insertion length. The thermostat which is supplied..
- Used to control water temperature in the hot water cylinder
- Secure immersion sensing
- Supplied with a ½"BSP/100mm pocket.
The ITD 100 is an immersion thermostat which incorporates a separate..
- Used to limit the water temperature in the hot water cylinder
- Secure immersion sensing
- Incorporates a hand reset feature
The ITL 100 is an immersion limit thermostat having an insertion len..
The HTS3 cylinder thermostat controls the domestic hot water temperature to suit your lifestyle and gives energy savings when set between the recommended 60ºC - 65ºC.
* Easy fixing to all vented ho..
* Probe thermostat * 25-95C * With 1/2" well * SPDT switch * Suitable replacement for L6188B2034 * Conforms to EC directive 73/23/EEC Click here for Honeywell datasheet..
The L641 is a range of thermostats designed for surface mounting on domestic hot water cylinders
* 4(2)A SPDT contacts
* Dimensions 79x44x54mm HxWxD
Model: L641A1039 (replaces L641A1005)
&nb..
Ideal for use for Underfloor Heating - switching off the secondary circulating pump when the flow rail goes over the set temperature (e.g. when the mixing valve fails). Bulb should be positioned..
