Image is for illustration only and should not be relied upon Danfoss Randall ITD Dual Cylinder Thermostat

Danfoss Randall ITD Dual Cylinder Thermostat



£83.68
Ex VAT: £69.73
HCO Code: 12C08P
Availability:  In Stock

- Used to control water temperature in the hot water cylinder
- Secure immersion sensing
- Supplied with a ½"BSP/100mm pocket.

The ITD 100 is an immersion thermostat which incorporates a separate limit and control function.

The control function set point can be varied between 0°C and 90°C. The limit function which requires manual re-setting after activation is factory pre-set to 80°C.

Model: 099-106200

Replaces (uses existing pocket):
IMIT TLSC 07050 (542816)
Tepcon TPSRM1-1000
Campini Corel TS95H30

Replaces (pocket replacement may be required):
C.A.E.M Combi AMR
Watts Aqualux 0405301X TRS-100-N
Honeywell Aquastat L6191B2005 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • The secondary thermostat is only activated if the main thermostat fails in the on position.  It needs to be manually reset every time it reaches temperature to ensure the thermostat is replaced.  The reset button is under the small knob on the front.
  • Live in - 'C' on Control Link '2' on Control to 'C' on Limit Live out - '2' on Limit.
Showing 1 to 2 of 2 (1 pages)