Image is for illustration only and should not be relied upon Danfoss Randall RAS-C2 Replacement Head

Danfoss Randall RAS-C2 Replacement Head

Ex VAT: £13.29
HCO Code: BU132
Availability:  In Stock

Replacement RAS-C2 Thermostatic Heads.

Loose packed.

Can also be used to replace heads on RAS-C TRVs (Click here for photo)

Danfoss Part no. 013G604000

Please see our Danfoss Replacement TRV Sensor guide








Write a review

Note: HTML is not translated!
    Bad           Good
I have a Danfoss TRV don’t know which model The head has a 0 setting. I need to remove the radiator will the 0 setting allow me to drain and remove the radiator or do I need an adaptor to stop the water flow ?? If so any idea which one I would need ?? Thanks
The 0 setting will keep the valve closed unless it gets very cold.
I need to replace a Danfoss RAS-C2 head which broke the plastic bit at the top. Is it straightforward to change leaving the body in tact?
Yes, it is a simple swap.
Can these be used as a direct replacement for the Danfoss RA2910 heads on RA valves?
In domestic situations, yes. They may restrict the flow too much in commercial installations.
Can I replace a Danfoss RAS_C 5023 head with this head?
Yes you can.
Hi I have the old Pegler Bulldog Gen 1 model 42 EN215 TRV. Is there a means to swop my old TRV heads without having to replace the whole fitting with these or similar good quality TRV? I cannot get a plumber to come to do such small jobs. thanks Darrell
Hi. I'm afraid not. The whole valve will need to be changed.
My mother has these on her "sluggish" radiators so I'm trying to check the bleeding and circulation. If I am trying to test it on a hot day will they cut out if the room's too hot or does the max position over ride the thermostat and admit circulation regardless of room temperature? Thank You.
The max position is 28C, so it is unlikely the room will be hot enough to close the valve.
I have a Danfoss thermostatic valve which does not have a threaded fixing but rather you twist click, twist click to remove. Similarly to put on. It is broken and I need a replacement of the same type. Would this one fit?
Yes it will.
Do you know if these will fit the old Drayton TRV2 fittings? Really don't want to have to replace the whole Fitting. Thanks in advance.
The TRV2 is too old, you will need to replace the whole valve.
Would this TRV Head replace the RAS-d Combi head code 013G5150. Thanks David.
Yes it will.
I have a number of old RA Danfoss TRV heads that I would like to replace. Can you explain what the difference is between this product, and the RA2910 with sensor?
The RA2910 head is also suitable for use with commercial Danfoss valves as it allows greater flow. The RAS-C2 is only for domestic valves.
Hi, I think I had Danfoss valves fitted to radiators, but dogs have chewed the heads off. It looks like the valve type here with a knurled nut and pin, but my valves are fitted horizontally. They are removed by twisting a collar at the inner end of the plastic head and twisting it off to allow access. Is this a suitable replacement head? Thanks
Yes it is.
how will i know this will fit my radiator
Please see our Danfoss TRV Head replacement Guide at:

Ask a question

Note: HTML is not translated!