Ivar Premium 10 Zone Manifold

Ivar distribution manifolds are obtained from drawn brass bars with a special profile. They are machined and assembled automatically using the special innovative machinery in the company workshop. Each manifold is tested under pressure with all the fittings and accessories mounted to be sure that there are no leaks. The manifolds and relative fittings obtained directly from the bars are submitted to stress relieving treatment after mechanical finishing to eliminate all possibility of future cracking and breaking. Threads on the main column connections are according to the ISO228 standard. Derivation pipes are connected by means of 3/4“ EUROKONUS fittings mounted on the manifold with an o-ring and sealed to ensure they do not loosen when disassembling the fitting. All the manifold fittings and accessories (discharge valves, air valves, etc…) are soft-sealed with o-rings and do not require any other intermediate seals (such as p.t.f.e., hemp, etc…).

1" pre-assembled distribution manifold nickel-plated, 3/4" euroconus takeoffs.

Supplied together with:
- Lockshields with flow meters included
- Manual adjustment valves on return rail set up to take thermo-electric heads;
- 2 blanking plugs 1" complete water drain or fill valves ;
- 2 automatic air vent 1/2" with upper manual bleed;
- 2 double metal bracket 1".