Image is for illustration only and should not be relied upon Siemens DVA2/5 (CZV222) Actuator
Siemens DVA2/5 (CZV222) Actuator

Siemens DVA2/5 (CZV222) Actuator

0 reviews
£124.80
Ex VAT: £104.00
Brand:
HCO Code: 21B04
Availability:  In Stock

Replacement actuator for use with Siemens CZV222 motorised valves.
Can also be used on CZV228 valves where the white wire is not currently used.

Also suitable for replacement of:
Orkli models 60421600, 60521600, 60520604, 60821600, 60921600, 60441600, 60841600, 50021600, 50041600
Telford model 60521623
Boss Therm BZV222 (metal head)

Not suitable for motorised valves with other model numbers.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • I'm afraid not.  A complete valve change is required.

  • Yes it will.

  • Yes it would.

  • All you can get is the synchron motor.  So you will need to replace the whole actuator.

  • The DVA2/5 is the replacement powerhead for the CZV222.  So can be replaced by itself.

  • Hi. Pull the actuator off from the valve and check the spindle is free.
  • Hi. As long as the white wire is not used, you can use the DVA2/5.
  • Hi. It sounds like the gears have worn. Check this is not because the valve itself has seized before you change just the actuator.
  • It does sound like it.
  • I'm afraid not. A complete valve change will be needed.
  • This is the replacement actuator for that valve.
  • Hi. I'm afraid not. A complete valve change is needed.
  • I'm afraid it will not replace the old plastic ones.
  • Yes it can. It should be back within a week.
  • Hi. Yes it will.
Showing 1 to 15 of 45 (3 pages)
Expand All
  • I'm afraid not.  A complete valve change is required.

  • Yes it will.

  • Yes it would.

  • All you can get is the synchron motor.  So you will need to replace the whole actuator.

  • The DVA2/5 is the replacement powerhead for the CZV222.  So can be replaced by itself.

  • Hi. Pull the actuator off from the valve and check the spindle is free.
  • Hi. As long as the white wire is not used, you can use the DVA2/5.
  • Hi. It sounds like the gears have worn. Check this is not because the valve itself has seized before you change just the actuator.
  • It does sound like it.
  • I'm afraid not. A complete valve change will be needed.
  • This is the replacement actuator for that valve.
  • Hi. I'm afraid not. A complete valve change is needed.
  • I'm afraid it will not replace the old plastic ones.
  • Yes it can. It should be back within a week.
  • Hi. Yes it will.
Showing 1 to 15 of 45 (3 pages)