Image is for illustration only and should not be relied upon Capillary Aquastat Thermostat
Capillary Aquastat Thermostat

Capillary Aquastat Thermostat

0 reviews
£23.99
Ex VAT: £19.99
Manufacturer
HCO Code: 12A00
Stock  Obsolete

Ideal for use on hot water cylinders

Can be used for Underfloor Heating - switching off the secondary circulating pump when the flow rail goes over the set temperature (e.g. when the mixing valve fails). Bulb should be positioned by placing it under the rubber grip on the metal brackets in contact with flow rail.

Technical Data
- Bulb length: 90 mm
- Bulb diameter: 6.5 mm
- Capillary Length: 1300 mm
- Setting: 0-90°C
- SPDT Contacts
- Contact: 16(3)A @ 250v
- Differential: 5 °C

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • It works by expanding gas, so cannot be extended.

  • Yes you can.
  • Please email sales@heatingcontrolsonline.com and they will send you a link.
  • Yes it does.
  • Normally a limit thermostat (with manual reset to switch it back on) is used for overheat protection. This is a control thermostat, so works like the main thermostat. Using a control thermostat for overheat protection may leave the user unaware that the first thermostat has failed. We can obtain the limit version if you need that.
Showing 1 to 5 of 5 (1 pages)
Expand All
  • It works by expanding gas, so cannot be extended.

  • Yes you can.
  • Please email sales@heatingcontrolsonline.com and they will send you a link.
  • Yes it does.
  • Normally a limit thermostat (with manual reset to switch it back on) is used for overheat protection. This is a control thermostat, so works like the main thermostat. Using a control thermostat for overheat protection may leave the user unaware that the first thermostat has failed. We can obtain the limit version if you need that.
Showing 1 to 5 of 5 (1 pages)